- Long Skinny Wing Thing - ASW 22BL
- 40% Marske Monarch
- Hall Cherokee II - 1/4 scale
- 1/2 scale Orlik
- Willhobby 4M Discus
- Topmodel Ventus 2cx
- Rodelmodell ASK-21 Master Edition 1:2.8 scale with SLS
- Faltus 5m ASG-29
- Paritech SZD54 Perkoz
- Half scale H101 Salto
- Le triplan Clément
- S2g 3.2m ka6e
- graupner discus 2b
- Paritech DG 1000, 8.88 M
- HF Ventus 2AX 5m/6m Build
- AMA Large Model Requirements
- 1/2 Scale Wien
- 4.5 meter turbine powered Salto
- SZD59 Resurection (sic!)
- Duo Discus 4M SLS interior battery placement?
- dg808s
- H-Models 1/3 Scale Arcus 6.6m
- Balsa or lack of it
- Availability of CNC/laser kits for 5m Ka6e
- SZD59 repairs
- 1/3 Duo-Discus
- 5m ASW22
- TOP modeltechnik Ventus 2ax
- Glasfugel ASW 20 4M - Resurrected
- incorporating servos in the stab
- Hemple 50% KA6
- 134in Minimoa from AirBorne Models
- 1:3 Scale Schweizer SGU 1-7 by Aerosente / Tom Martin design
- 1:2.5 ASH 31 Hmodel
- 1:4 Scale Schweizer SGS 2-33 by Aviation Concepts
- HABICHT Bob Sealy Kit
- 4.5m Fox, rebuilding an old favorite.
- 1:3.5 Spalinger S25
- Bocian SZD-9 and introduction
- 1:7 "Stand-off Scale" Schweizer SGU 2-22 from 1:6 scale SGU 1-7 plans by Aerosente
- 1:4 IS-B Komar
- Mdm-1 fox 1:3
- 1/3 Petrel
- DFS Rheiher 3- 6.3 m
- 1965 Schemp Hirth Austria/SHK
- H-Models, 8m Duo Discus
- 1/6 Scale 1932 BS2 'Balestruccio'
- Let DG1000 build
- Graupner spoilers.
- 5.4 m HB Modellbau KA-7
- SIREN C30 EDELWEISS
- Graupner Discus 2ct 3.3 meter
- Wanting to build a glider
- Building a 50% ASW 22
- 1/3 scale Grunau Baby 1
- edelweiss
- SZD-56 Diana 2
- 5.3M Nimbus 4D Up and GO II install
- Carnage repair advice needed
- PWS 101 at 6.3 meter span -- Podlaska Wytornia Samolotow gull wing vintage beauty
- Nimbus 4D repair
- 1/3 Scale Pratt Ried
- Micro Blanik L13
- Pimp My Salto. Make it a Forty. (46% scale Hans Muller Salto!)
- 6m Condor IV
- Discus
- Hempel 50% Ka6
- Anyone ever build a LF 109 Pionyr from vintage sailplanes
- ASG 29 6m FROM ROSENTHAL
- ASW-22 - 7.2 meter
- 1/3.5 Scale Slingsby Type 13 Petrel / Chris Williams design
- 5 mtr HF Ventus build
- T REX and the Dragonfly
- 1:10 AS K-13 scratch build
- JS1 model B 1/4 scale
- FOX 1/4 Build
- Arcus? / Duo? / Janus? / Nimbus?
- Building scratch wings for a 6m ASW 28. Looking for airfoil suggestion / stab volume
- 33% Kaiser Ka-3 - Island Models
- Restoring an old favourite
- Adding Bling to a cheaper arf
- JS 1 scale 1/3.75
- 1/3 Breguet 905 Fauvette
- PWS 101 1/3rd Scale
- SCHEIBE-LORAVIA TOPAZE 3rd SCALE
- Bj-1b duster
- Trick to get a front opening canopy
- SZD-9bis 1D Bocian 1:4 Scale - Szybowcowy Zakład Doświadczalny
- Finishing the Lawerence Tech
- One shot fuselage molds?
- 1/3 scale Hall Cherokee, from David Smith design
- New life for an old 4.6m FOX
- FOX horizontal stabilizer incidence question
- 1/3 Scale Scheibe SF-25C Rotax Falke
- The scratchbuilding of the ASH30Mi
- Chris Williams designed Scheibe - Bergfalke Mü 13 E
- Warsztaty Szybowcowe Orlik II aka The Kocjan Orlik in 1:3 scale from Old Gilders
- SoaringUSA LET ASH-31 1/3 scale
- Chris Williams 1/4 Scale Minimoa Build Thread
- Roenleche Ka4 scratch build 1/3,5
- Ka8
- SPALINGER S25a 1:3.5 SCALE
- 1/3 H-Model Arcus
- Karel Vageneknecht Ventus 2 setup
- Balance for a small Blanik L-23
- Split elevators, Nimbus 4D
- ASK14 build