Search:

Peter posted on RCG that the next batch is due on July 28th.

Servo direction, and hence sub trims, depend on the servos used. If they used 6030's or whatever, and you substituted Futaba, which rotate the opposite direction for a given input, then its natural...

I talked to the guys at Nall, they had one with and one without, they said they are "fun to play with but not necessary"

Thanks Steve!

I was going to say, anything with a 6v rating, which is nearly all servos these days except some stuff like helicopter tail rotor servos, can take 6v. So if you have 6v rated servos and A123's...

Why the regulator?

I got recruited to tow because "helicopter guys seem to be able to fly anything"

But yes, flying both gliders and power definitely helps.

The location was central for a lot of the guys here in Florida, but it's also a nice wide open field, the club is very excited to host us, and there's a lot of family stuff nearby.

I'll be...

No offense taken, I'll be attending Huntsville as well :)

I've confirmed the official dates with the Daytona Club, November 1, 2 and 3

There were too many conflicts for October and I wanted at least a month separation for Huntsville out of respect to...

I had the exact same issue with the Mystique I just did for Model Aviation, I had to sand out the wing tube sleeve a bit.

Looks good, I saw them towing with this at Nall, it's impressive

It's awesome at what it does, but flying fast or doing aerobatics isn't its forte'

If you want I have a set of JTec mufflers that were made for that cowl and that engine, send me a PM, I pulled...

I can tell you don't pull a 35 pound plane with the 80! Don't ask how I know.

I put JTec mufflers on mine that they made specifically for me and it picked up over 900 rpm, yes they are louder, but...

Ok guys, I had to replace the "Piper" on the front and I got tired of the yellowing around the 235 Pawnee and the N number so I scanned everything in and remade the logo's out of sign vinyl.

If...

You dont need matchboxes, the mating function on the 11,12 etc is the bomb

Having seen it at Nall, I was sold

In stock and shipping!!!

Thanks for the files Len, this is what I came up with....

Sure. My Pawnee would pull ASK's and the like without stalling them, though I did have JTec mufflers made for it which picked up 980 or so rpm from the week wacker mufflers.

Hoping to see Pete's at Nall.

Sure will.

I've been to a lot of events but this is my first time for Nall

I'm heading out to Nall on Wed after work. I'll be sure to report anything cool going on in the aerotowing world here.

I'm expecting at the least to get some flight shots of the E-Flite Blanik

No problem doing that.

I was pretty disappointed that it wasn't a good aircraft grade aluminium.

Naturally it happened when I was packing for my first organized aero tow event :(