Search:

It's probably the same as listed with Icare:

http://www.icare-rc.com/wilga-2000.htm

Double answer, Martin answered the question allready

Although I'm a bit over represented in this picture series with my Salto I don't mind this at all. Thanks Martin for the great company you were during this nice weekend.

You forgot to tell about...

This new ASK21 can't be all that bad, it has Dutch markings

I remember to have heard that at Axel's they had massive computer problems and with that a total loss of customer data and orders. This could be a reason for the ordering problems.

I don't know if...

Would this be a good product for using on retract doors?

http://parkrcmodels.com/product_info.php?cPath=103_107&products_id=1040

When I have some debris rattling around in a confined space which I can't reach, I sometimes simply inject some liquidly epoxy resin and shake the debris into the epoxy until the rattling stops.

Gudmund,

I'm not sure if you are aware of it, didn't look into the whole thread, but these (in my view awfull) electric spoilers need a careful setting of the end points in your radio in order to...

Jim,

It seems you have covered this issue well.

Cheers, Harm

Maybe I missed it in this whole thread but did the vertical stabilizer get any extra reinforcements to prevent it from snapping off the fuselage because of the tow line pushing it aside? I don't mean...

I use the same spoilers in my Phoenix 1:2.5 K8. I found that these are operated quite heavy when held upside down, like you use them on the bottom of your K6 wing. Don't you have any issues with...

With the two easy modifications I did to the new wing panels, described on the RC-Groups thread, I don't have any hesitation to play around with the K8 anymore. If it will roll is the question for...

Very nice flyer, should be this one.

http://www.rcgroups.com/forums/showthread.php?t=1682864

You could also short-circuit a loaded LiPo pack, should produce a lot of smoke and maybe even sparks. (just kidding, weekend has arrived)

Found a producer of a half scale Libelle.

http://www.kirchner-modellbau.de/9.html

Instead of Goop, which we to my knowledge don't find here in Europe, I often use hot melt glue to stabilize the wire connection to the connector.

In the link I posted before you can find a lot of info on the Airworld Libelle, like how it is built up and the weight. This is the same Libelle as in the film, the landing is defenately shown in...

Hi Tim,

Just any pack, normally one of the two 5S packs will do, the motor will not start up in maximum speed anyway. It's a good idea to color code the plugs (for instance with colored shrink...

Rossco will be referring to the Airworld website.

At the bottom at the description of each model you can click on the word "Preis".

Or go directly to the price list:
...

At least it's aparently scale now to put a turbine on a K8.

http://scalesoaring.co.uk/cgi-bin/yabb/yabb2/YaBB.pl?num=1360235114

Here some vitamins.

http://lesgpr.free.fr/fotojour/actualite/bac-130219/bac-130219.htm

The three sets of springs arrived today in The Netherlands, seem to be top notch quality.

Thanks again to Len for this initiative.

I used the 50 cm long mechanical servo driven air brakes and only on top of the wing. These fit beautifully when you cut the slot in the K8b wing a little further in length and take out the bottom of...

Rossco,

I wonder if this is possible because of the different lengths of the two centre joiner carbon rods and 4 hollow outer joiner carbon tubes.

I take it that this K8b has the latest reinforced wing panels with the 32 mm aluminium tube hidden within the D-box and 18 mm aluminium tube further back reaching half way of the panel.

If so I...